Designing an Automatic Card Shuffler :: Robotics

BackgroundMost involuntary instrument panel swaggerrs on the market today have a computer menu out put together slot, a card input slot, a cardbreakup area, and an arm between the card input slot and the separation area. The card input slot iswhere used separate are put to be shuffled. The arm makes sure that not too many cards enter the separationarea at a time. The separation area is where the actual shuffling occurs. The most common method ofseparation uses a system of rotating belts to pull cards out of the main pile and put them back at random(Card Shuffler). Another method uses a series of elevators. The elevators move up and down, while cardsare inserted randomly into each one. Then, the heap in the elevators are shuffled together (UncomfortableShoe). This design adds another level of randomness to the shuffling. The last essential part of the shuffleris the card output slot, which is simply where the shuffled cards total out of the machine.Our robot will be different. It has a card input and output slot, but the rest of the machine isdifferent. It shuffles by randomly choosing from several trays encompassing of cards. This method is faster and ismore flexible regarding the number of cards being shuffled than other shufflers. Also, this machine willdeal a number of different card games automatically.Casinos will want this robot because it is a faster way to shuffle more cards. It makes it so thatplayers can not count cards to gain an value over the casinos, and with its automatic dealingcapabilities, it will accession their efficiency, allowing them to earn more money.Preliminary DesignOur product will do more than current automatic card shufflers. In addition to just shuffling thecards, it will also deal them out. The final product will have many shuffling trays, to increase the capacityand effectiveness of the shuffler. It will have an LCD display with inputs that allow card players to select agame on the screen, and the robot will shuffle an d deal the cards according to the rules of the game.The final product will be mostly enclosed in a plastic case, to make it look satiny and preventtampering or damage to the parts inside. The internals, however, will not be plastic. The gears will be welloiledmetal, and the gates will also be polish up plastic to allow the cards to exit them rapidly. To allow the2robot to be low-cost, the metal parts would have to be aluminum. There would be itty-bitty to no specialized